A Guide to Reloading for Precision and Performance

At Gun Traders Australia, we pride ourselves on our meticulous reloading process for our 6.5 Creedmoor, .270, and .223 calibers. Reloading your own ammunition not only enhances accuracy but also offers cost savings and customization. Here’s a detailed look at our reloading process, specifically for the 6.5 Creedmoor and .270 Winchester, using trusted Lee reloading equipment and data from ADI World Class.

Reloading Equipment and Components

We use Lee reloading equipment, renowned for its precision and reliability. Here’s what we use:

• Press: Lee Precision Classic Turret Press
• Dies: Lee Pacesetter 3-Die Set
• Case Trimmer: Lee Case Length Gauge and Cutter

For our 6.5 Creedmoor and .270 Winchester rounds, we use the following components:

6.5 Creedmoor:

• Case: Hornady
• Primer: Federal 210M, Large Rifle Match
• Bullet: Hornady ELD-M, 147 GR.
• Propellant: AR2209

.270 Winchester:

• Case: Winchester
• Primer: Winchester LR, Large Rifle
• Bullet: Hornady Soft Point, 130 GR.
• Propellant: AR2209

Reloading Data for 6.5 Creedmoor

The 6.5 Creedmoor is renowned for its excellent ballistics and accuracy. Here’s the load data we follow:

• Case: Hornady
• Twist: 1:8"
• Primer: Federal 210M, Large Rifle Match
• Barrel Length: 24"
• Trim Length: 1.910"
• Pressure Limit: SAAMI Maximum Average Pressure Limit: 62,000 PSI
• Bullet Weight: 147 GR.
• Bullet Type: Hornady ELD-M
• Propellant: AR2209

Load Data:

• Starting Load: 36.7 grains, 2389 fps, 44,700 psi
• Maximum Load: 41.8 grains, 2680 fps, 60,800 psi

For more detailed load data, visit ADI World Class.

Reloading Data for .270 Winchester

The .270 Winchester is a classic hunting cartridge known for its flat trajectory and power. Here’s the load data we use:

• Case: Winchester
• Twist: 1:10"
• Primer: Winchester LR, Large Rifle
• Barrel Length: 24"
• Trim Length: 2.530"
• Pressure Limit: SAAMI Maximum Average Pressure Limit: 52,000 CUP / 65,000 PSI
• Bullet Weight: 130 GR.
• Bullet Type: Hornady Soft Point
• Propellant: AR2209

Load Data:

• Starting Load: 51.0 grains, 2865 fps, 45,200 CUP
• Maximum Load: 54.3 grains, 3012 fps, 50,500 CUP

For more detailed load data, visit ADI World Class.

Reloading Steps

1. Case Preparation: Clean and inspect cases. Trim to the specified lengths.
2. Priming: Seat primers using the Lee Auto Bench Prime.
3. Powder Charging: Measure and dispense AR2209 powder. Start with the minimum load and gradually increase, not exceeding the maximum load.
4. Bullet Seating: Seat bullets to the specified overall lengths.
5. Crimping: Apply a light crimp using the Lee Factory Crimp Die for consistent bullet tension.

Safety and Consistency

Always adhere to recommended safety guidelines. Use a reliable powder scale to ensure precise measurements. Start with the minimum load and work up, watching for pressure signs.

Conclusion

Reloading is a rewarding process that enhances shooting performance. By following these steps and using quality components, you can achieve exceptional accuracy and consistency. Happy reloading!

For more tips and high-quality reloading equipment, visit Gun Traders Australia.

Disclaimer

Reloading ammunition involves inherent risks. This guide is only, always perform your own research or consult a mentor before starting any reloading process. Ensure you follow all safety guidelines, and never exceed recommended loads.